Gas ramp is a high-pressure manifold, by means of which the necessary quantity of gas cylinders, connecting tubes, pressure regulators, valves, safety valves, pressure gauges, etc. is connected to the consumption line. It is designed for uninterrupted supply of technical gas to the end user.
Gas ramps are used at industrial enterprises and medical institutions.
According to the type of construction, gas ramps are divided into:
- bypass;
- gas-discharge;
- filling.
Overflow ramps
A bypass manifold is a manifold that consists of two branches (right and left) connected by a central assembly. The gas circuit includes a minimum of two cylinder manifolds and one connecting manifold. Each manifold has a common valve to control group turn-on. The bypass ramps can be either discharge or fill ramps. The filling ramp ensures uninterrupted filling of cylinders, while the discharge ramp ensures constant gas supply to the consumer network. Bypass ramps are designed to create a continuous gas supply to the consumer by alternately switching groups of cylinders into operation with their timely replacement.
Gas discharge ramps
Gas discharge ramp is a manifold, on which fittings and regulator are installed, designed for connection of gas-filled cylinders and delivery of working medium to the consumption network.
Filling ramps
Filling ramp is a manifold consisting of one or two branches designed to connect empty cylinders and fill them with technical gas (oxygen, hydrogen, air, inert gases, carbon dioxide) at a given pressure. From 1 to 10 valves (even up to 30 valves according to the customer's requirements) are installed on one branch to connect cylinders by means of a coil. One end of the coil is connected to the cylinder and the other end to the valve installed on the filling branch of the ramp. When the filling ramp is designed with two branches, a high-pressure safety valve, a shut-off valve and a pressure gauge are installed on the central branch. In contrast to the discharge ramp, the installation of a safety valve is mandatory Gas filling is performed from air distribution units of any capacity, high-pressure compressors, gasifiers, gasification plants.
CRYO INTER TRADIN LLC supplies ramps in factory/standard version, as well as custom-made ramps from imported or domestic components according to the Customer's requirements. Ramps are produced in the following possible options:
- cabinet version;
- stationary (fixing to the wall of the room);
- container version.
.jpg.webp)
For a technical and commercial offer and additional information please call: +38(050)304-21-21, e-mail: [email protected].